How to Hook a hidden camera spy

For those who are technically at issue, as I connect any type of equipment has always been problematic. I know I am not alone. Thus, in the detailed instructions.

First read the instructions. I know that most guys are against this basic need. It 's a macho thing. Once we are out of the way you are ready to rock.

For the purposes of this article, the "we" go home to call the place that stores the hidden camera.

For a wired network> CAMERA:

1. Turn the camera with the power connector to the power of the camera marked power. These pins are the wires from the back of the camera.

2. Connect the video output of the camera to your recording device. This is done by connecting an RCA cable from the connector on the cables from the back of the camera and video input on the video recording device.

3. Ifwith a video recorder, you may need to adjust the video input, see note below.

Note.
For the VCR video input.

1. After turning on the VCR, connect the TV via coaxial cable or RCA.

2. Then connect a cable to the VCR and TV-Out TV "Antenna Input".

3. Turn off the TV and set it to channel 3

4. Play movies review of your VCR and make sure the VCR is connected correctly.

5. With the VCR remote control, go to "AU" (Auxiliary Input) mode or "LineIn mode usually found below channel 2 VCR Others, "AU" by pressing "" button on the remote control input.

For a wireless camera:

1. Turn on the camera / transmitter for the power cord from the "home" into a socket. The camera is internally powered with electricity and other connections are required.

2. If you have a VCR, you may need to adjust the video input, see note below.

After the camera is connected, set the Receiver.

1. Connect the receiver to the power supply at 12V. This is the black box with a white arrow to it. On the page that you want the device turns on. (Display LED should be lit)

2. Connect the video output of the receiver to the recording device. This is done through the patch cable between the yellow RCA jack on the front of the receiver and a video input on your recording device.

3. You should be able to see from the video images> Camera.

4. The camera has a 1000ft line of sight range. If the signal is not clear, move the receiver to see if reception improves. The receiver has an "arrow" and should best performance was in the general direction of the camera.

Note.
For the VCR video input.

6. After turning on the VCR, connect the TV via coaxial cable or RCA.

7. Then connect a cable to the VCR and TV-Out TV "AntennaInput.

8. Turn off the TV and set it to channel 3

9. Play movies review of your VCR and make sure the VCR is connected correctly.

10. With the remote control for VCR "AU" (Auxiliary Input) mode or go to "Line In" mode usually found below channel 2 VCRs how others can "AU" by pressing the "Input" for remote access.

You're done: Step by idiot-proof instructions for connecting a spy camera hidden.